Icom IC-F27SR User Manual

■ Optional BP-263 b at t e r y c a s e
When using the optional battery case, install 6 × AA (LR6) size
alkaline batteries, as illustrated below.
Remove the battery case if it is attached. (p. 3) q
Install 6 w × AA (LR6) size alkaline batteries, as shown below.
 •Installonlyalkalinebatteries.
 •Besuretoobservethecorrectpolarity.
Reattach the battery case. (p. 3) e
CAUTION:
•When installing batteries, make sure they are all the same
brand, type and capacity. Also, do not mix new and old batter-
ies together.
•Keepthebatteryterminalsclean.It’sagoodideatoregularly
clean them.
•Neverincinerateusedbatterycellssinceinternalbatterygas
may cause them to rupture.
•Neverexposeadetachedbatterycasetowater.Ifthebattery
case gets wet, be sure to wipe it dry before using it.
•Neverusebatterieswhoseinsulatedcoverisdamaged.
NOTE: When the optional battery case is attached, the battery
type must be selected as “Battery case operation” when turning
the transceiver ON. See page 10 for details.
30
5
BATTERY CASE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Be careful! The negative
terminals of the battery case
protrude from the body, so
pay attention not to injure
your fingers when inserting
the batteries.

Icom IC-F27SR Specifications

General

Brand	Icom
Model	IC-F27SR
Category	Transceiver
Language	English