Push
and hold [Pl.
• While pushing [Pl, keys and switches can
be
accessed normally.
• Release [P] to return to the "locked" condition.
~
CUSTOM PROGRAM
Custom programs can
be
written
to
meet a wide variety
of
op-
erating needs.
To
activate a custom program:
Push [Pl.
• Operation proceeds according to the nature of the program.
<>
MAN
DOWN FUNCTION
This function provides a measure of safety when working
in
hazardous environments, etc., automatically sending an
emergency signal to your base station. This is particularly
useful
if
you are accidentally incapacitated, etc. This function
requires the installation of the optional UT-100
MAN
DOWN
uNIT-eonsult your dealer for details.
To
activate this function:
No
action
is
necessary
on
your
part-an
emergency signal is
automatically sent after a pre
...
programmed period in which
the transceiver remains
in
a horizontalposition.
•
To
deactivate the function, turn the power off, then on again.
Note: Be careful!
If
your transceiver
is
programmed with this
function,
do
not
lie it down
on
its side while the power is
turned
on,
otherwise
an
emergency signal will be sent un-
necessarily.
DEALER-PROGRAMMABLE FUNCTIONS 3
• Programmable switch reference
Use this page to record the functions which have been as-
signed
to
the dealer-programmable switches
on
your trans-
ceiver. (Use a pencil as your transceiver may be
reprogrammed
in
the future.)
~Q_--------
Q_---------
~1
_
~---------
~~---------
B
-----------
~-
- - - - - - - - -
10
To Next Page
Loading...
Need help?
General
