Icom IC-M200 User Manual

3
8
3
BASIC OPERATION
16
15
14
13
12
11
10
9
8
7
6
5
4
2
1
■ The Microphone Lock function
■ Backlight brightness level
■ The AquaQuake function
The Microphone Lock function locks [▲], [▼], and
[HI/LO] on the supplied microphone. The function
prevents from accidentally changing channels or
functions.
z While holding down [HI/LO] on the microphone, turn
ON the transceiver to toggle the Microphone Lock
function ON or OFF.
The display and keys can be backlit for better visibility
under low light conditions.
z While holding down [SCAN], push [▲] or [▼]
to adjust the brightness of the display and key
backlight.
L The brightness level is selectable in 3 levels, or OFF.
You can use the AquaQuake function to clear water
away from the speaker grill. The function helps drain
water away from the speaker housing by emitting a
vibrating noise.
z While holding down [▲] and [▼] on the transceiver
at the same time, turn ON the transceiver.
• A low beep sounds while you hold both [▲] and [▼] to
drain water, regardless of [VOL] level setting.
L While the AquaQuake function is ON, key operations
are disabled.
L “
” scrolls.

Icom IC-M200 Specifications

General

Purpose	-
Maximum range	- m
Operating frequency	156.025 - 162.025 MHz
Display type	LCD
Product color	Black
International Protection (IP) code	IPX7
Operating temperature (T-T)	-20 - 60 °C

Weight and Dimensions

Depth	67 mm
Width	153 mm
Height	133 mm
Weight	790 g