Icom IC-M36 Service Manual

1 - 1
SECTION 1
.
SPECIFICATIONS
ï GENERAL
• Frequency coverage : Transmit 156.025–157.425 MHz
Receive 156.050–163.275 MHz
• Mode : FM (16K0G3E)
• Channel spacing : 25 kHz
• Power supply requirement : BP-251 and BP-252 only
• Current drain (at 7.4 V DC) : TX (6 W/1 W) 1.5 A/0.7 A typical
Max. audio 0.3 A typical (internal speaker)
0.2 A typical (external speaker)
Power save 10 mA typical
• Frequency stability : ±10 ppm
• Operating temperature range : –20°C to +60°C; –4°F to +140°F
• Dimensions : 62 (W)
× 139.5(H) × 43(D) mm
(projections not included) 2
7
⁄16(W) × 5
1
⁄2(H) × 1
11
⁄16(D) inch
• Weight : Approx. 295 g; 10.4 oz
(incl. BP-252, FA-SC58V and MB-109)
ï TRANSMITTER
• Output power (at 7.4 V DC) : 6 W (High) and 1 W (Low)
• Modulation system : Variable reactance frequency modulation
• Maximum frequency deviation : ±5 kHz
• Adjacent channel power : 70 dB
• Spurious emissions : –68 dBc typical
ï RECEIVER
• Receive system : Double-conversion superheterodyne
• Sensitivity (12 dB SINAD) : 0.25 μV typical
• Squelch sensitivity : 0.35 μV typical (at threshold)
• Intermodulation : 70 dB typical
• Spurious response : 70 dB typical
• Adjacent channel selectivity : 70 dB typical
• Audio output power (at 10% distortion)
Internal speaker : 0.70 W typical with a 16 Ω load
External speaker : 0.35 W typical with an 8 Ω load
1-2 IC-M361-1 IC-M35
ï GENERAL
• Frequency coverage : Transmit 156.000–161.450 MHz
Receive 156.000–163.425 MHz
• Mode : FM (16K0G3E)
• Channel spacing : 25 kHz
• Power supply requirement : BP-251 and BP-252 only
• Current drain (at 7.4 V DC)
TX at 6 W : 1.5 A typical
at 5 W : 1.3 A typical
at 1 W : 0.7 A typical
at 0.5 W : 0.6 A typical
RX Max. audio
Internal speaker : 0.3 A typical
External speaker : 0.2 A typical
Power save : 10 mA typical
• Frequency stability : ±1.5 kHz
• Operating temperature range : –15°C to +55°C
• Dimensions : 62 (W) u 139.5 (H) u 43 (D) mm
(Projections not included)
• Weight : Approx. 295 g
(incl. BP-252, FA-SC58V and MB-109)
ï TRANSMITTER
• Output power (at 7.4 V DC) : 6 W (High) and 1 W (Low)*
* 5 W (High) and 1 W (Low) for Australian
version
1 W (High) and 0.5 W (Low) for German
version depending on the pre-setting
• Modulation system : Variable reactance frequency
modulation
• Maximum frequency deviation : ±5 kHz
• Adjacent channel power : 70 dB
• Spurious emissions : 0.25 μW
ï RECEIVER
• Receive system : Double-conversion superhetero-
dyne
• Sensitivity (20 dB SINAD) : –2 dBμ emf typical
• Squelch sensitivity : –6 dBμ emf typical (at threshold)
• Intermodulation : 68 dB
• Spurious response : 70 dB*
* 65 dB for Australian version
• Adjacent channel selectivity : 70 dB
• Audio output power (at 10% distortion)
Internal speaker : 0.7 W typical with a 16 ȍ load
External speaker : 0.2 W with an 8 ȍ load
All stated specifi cations are subject to change without notice or obligation.

Icom IC-M36 Specifications

General

Purpose	Marine Radio Service
Operating frequency	156.025 – 157.425 MHz
Antenna connector type	FA-SC58V
Number of antenna connectors	1
Battery type	BP-252
Battery life (max)	8 h
Battery low indication	Yes
Product color	Black
Waterproof up to	1 m
International Protection (IP) code	IP57
Operating temperature (T-T)	-20 - 60 °C
Number of batteries included	1 pc(s)

Weight and Dimensions

Depth	43 mm
Width	62 mm
Height	139.5 mm
Weight	295 g