MAINTAINING THE DUSTBIN 12
4: Open the filter cover.
5: Remove the HEPA filter and the
primary filter. It is NOT recommended to
wash the HEPA filter with water. Tap
gently to remove dust.
Empty your Dustbin and clean your filters regularly to ensure optimal suction power. NEVER attempt to operate the Autovac unless BOTH
filters are in place as that will reduce cleaning efficiency and may damage the fan assembly.
1: Remove the dustbin from the Autovac
by pressing the dustbin release button.
2: Open the dustbin side cover. 3: Empty dust & debris by gently tapping.
6: Rinse the primary filter screen on both
sides with water. Take care not to puncture
the screen.
(Continued on
next page)
To Next Page
Loading...
Need help?
General
