USING YOUR AUTOVAC ECLIPSE 7
Before using this product, please clear the floor of all objects other than furniture as some small objects may obstruct, get caught
in, or damage the iHome Autovac Eclipse. Your Autovac should be docked to the base and FULLY CHARGED before beginning a
cleaning cycle. This will ensure optimal run time.
Cleaning and Mapping - The Eclipse is designed with HomeMap navigational sensors to clean without the need to enter or save a
map of your home. Unlike less capable robot vacuums, your iHome Autovac Eclipse will vacuum and mop in a "U" shape cleaning
pattern. It will map out your home during every use, covering the entire square footage of the area. Simply initiate one of the
cleaning modes (described below) on the remote control, in the iHome Clean app, or simply tap the Power Icon on the Eclipse
to start an Auto-clean cycle. It’s that easy!
Returning to Base - The iHome Autovac Eclipse will detect the infrared signal emitted by the charging base to find its way back.
Please note that the infrared signal may be affected by distance, walls, or other obstructions. It may take several minutes for the
Eclipse to find its way back to the charging base. Small spaces, or spaces with lots of furniture will cause the Autovac to bounce
and redirect more frequently. The "U" type pattern will resume when it reaches open space. A map of the path taken by your
Autovac is available to view in the iHome Clean App.
To Next Page
Loading...
Need help?
General
