74 InFocus Corporation — Introduction Guide - DLP Multimedia Projector
Warning
Do not cover the lens with the lens cap or equivalent while the projector is on. Doing so can lead to melting
of the cap due to the heat emitted from the light output.
Do not place any objects, which are easily affected by heat, in front of the projection window. Doing so could
lead to the object melting from the heat that is emitted from the light output.
Do not use a spray containing flammable gas to get rid of accumulated dust and dirt on the filters and the
projection window. It may cause of fire.
Do not look at the lens while the projector is on. Serious damage to your eyes could result.
Manufacturer and EU importer in accordance with EU
directives
Manufacturer: InFocus Corporation
13190 SW 68th Parkway, Suite 120
Portland,
Oregon 97223
United States
EU Importer: InFocus International B.V.
Kingsfordweg 103
1043 GP Amsterdam,
The Netherlands
Compliance statements for acoustic noise
Machine Noise Information Regulation - 3. GPSGV,
The highest sound pressure level is less than 70 dB (A) in accordance with EN ISO 7779.
Notices
To Next Page
Loading...
Need help?
General
