Ingersoll-Rand Thermo King V-520 MAX 30 User Manual

Unit Operation
33
In Multi-temperature Units
Figure 17: Multi-temperature Units
1. Main Load Compartment: Press and release the SELECT
key twice, and the current Setpoint Temperature in the
main compartment and the letters SP will appear on
screen.
2. Press the UP or DOWN arrow keys to select the desired
Setpoint Temperature. Each time either of these buttons is
pressed and released, the Setpoint Temperature will
change 1 degree.
3. Press and release the SELECT key to change to the
Remote Compartment Setpoint Temperature Setting
Screen.
IMPORTANT: If the SELECT key is not pressed within 20
seconds to select the new Setpoint Temperature, the unit will
continue to run at the original Setpoint Temperature.
4. Remote Load Compartment: The present Setpoint
Temperature in the remote compartment and the letters
SP2 will appear on screen.
5. Press the UP or DOWN arrow keys to select the desired
Setpoint Temperature. Each time either of these buttons is
pressed and released, the Setpoint Temperature will
change 1 degree.
6. Press and release the SELECT key, and the Standard
Display will reappear on screen.
IMPORTANT: If the SELECT key is not pressed within 20
seconds to select the new Setpoint Temperature, the unit will
continue to run at the original Setpoint Temperature.
Unit Operation
33
In Multi-temperature Units
Figure 17: Multi-temperature Units
1. Main Load Compartment: Press and release the SELECT
key twice, and the current Setpoint Temperature in the
main compartment and the letters SP will appear on
screen.
2. Press the UP or DOWN arrow keys to select the desired
Setpoint Temperature. Each time either of these buttons is
pressed and released, the Setpoint Temperature will
change 1 degree.
3. Press and release the SELECT key to change to the
Remote Compartment Setpoint Temperature Setting
Screen.
IMPORTANT: If the SELECT key is not pressed within 20
seconds to select the new Setpoint Temperature, the unit will
continue to run at the original Setpoint Temperature.
4. Remote Load Compartment: The present Setpoint
Temperature in the remote compartment and the letters
SP2 will appear on screen.
5. Press the UP or DOWN arrow keys to select the desired
Setpoint Temperature. Each time either of these buttons is
pressed and released, the Setpoint Temperature will
change 1 degree.
6. Press and release the SELECT key, and the Standard
Display will reappear on screen.
IMPORTANT: If the SELECT key is not pressed within 20
seconds to select the new Setpoint Temperature, the unit will
continue to run at the original Setpoint Temperature.

Ingersoll-Rand Thermo King V-520 MAX 30 Specifications

General

Brand	Ingersoll-Rand
Model	Thermo King V-520 MAX 30
Category	Air Compressor
Language	English