-21-
AC800 Series Intelligent Machine Controller Hardware User Guide 4 Installation and Fixing
4.2.2 Installation Methods
The booksize controller can be installed through a rear earhook (booksize) or a side earhook (wall-
mounted) to be adapted to cabinets of dierent sizes. The controller must be tightened with four screws
to a tightening torque of 1.2 N.m. The controller is delivered with a rear earhook for booksize installation.
The side earhook is optional for special occasions.
1) Rear earhook 2) Side earhook
4.3 Installing and Removing the Fan
Fan (mm)
1 Removal
The bottom fan is removed as follows:
1) Unscrew the screws on the fan with your hand;
2) Pull out the fan assembly in the direction shown in the gure. Be careful not to damage the bottom wedge;
3) Remove the fan assembly.
To Next Page
Loading...
Need help?
General
