Insignia NS-DWR3SS1 Installation Guide

14
www.insigniaproducts.com
Step 6: Connecting the water supply line
1 Wrap the 90° elbow with Teflon tape twice.
2 Slide the compression nut, then the ferrule over the end of the water supply line.
3 Insert the water supply line into the 90° elbow.
4 Slide the ferrule against the 90° elbow and secure it with the compression nut.
You’ll need:
Note: If you have a threaded line you do not need a ferrule or compression nut.
Important: Make sure that the door spring does not rub or contact the water supply line or drain hose. Test by opening and
closing the door. Reroute the lines if interference occurs.
Adjustable wrench
Waterline kit
Teflon thread seal tape
Compression nut
Ferrule
Water supply line
90° elbow
Two wraps of Teflon thread seal tapeBack of dishwasher

Insignia NS-DWR3SS1 Specifications

General

Brand	Insignia
Model	NS-DWR3SS1
Category	Dishwasher
Language	English