EasyManuals Logo
Home>Insignia>Dishwasher>NS-DWR3SS1

Insignia NS-DWR3SS1 Installation Guide

Insignia NS-DWR3SS1
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
17
Top Control Dishwasher
www.insigniaproducts.com
Step 10: Position the dishwasher under the countertop
1 Make sure that the wires are secure under the dishwasher and not pinched or in contact with door springs or other
dishwasher components.
2 Push the dishwasher into the cabinet. The front corners of the dishwasher door should be flush with the cabinet
doors. Be careful not to dent the front panel with your knees or damage the countertop or cabinets with
dishwasher parts.
Tip: Check the tub insulation blanket, if equipped. It should be positioned so it is not bunched up or interfering with door springs.
Check by opening and closing the door.
Note: The back leveling leg is adjusted from the front of this dishwasher.
Do not push against the front door
panel with your knees. You will
damage the front panel.
Reposition the dishwasher by
grasping both sides with your hands

Other manuals for Insignia NS-DWR3SS1

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Insignia NS-DWR3SS1 and is the answer not in the manual?

Insignia NS-DWR3SS1 Specifications

General IconGeneral
BrandInsignia
ModelNS-DWR3SS1
CategoryDishwasher
LanguageEnglish

Related product manuals