Insignia NS-DWR3SS1 Installation Guide

20
www.insigniaproducts.com
3 Reinsert the plastic tub caps.
Step 13: Connecting the drain hose
1 Cut on the marked line as required for your installation. The drain hose’s molded end will fit 5/8” or 1" diameter
connections on the air gap, waste tee, or garbage disposal.
You’ll need:
Important: Follow all local codes and ordinances.
Plastic tub
cap
Screw
Plastic tub
cap
Phillips screwdriver
Screw-type
hose clamps
Coupler for extending
drain line (if applicable)
Cutting lines
IMPORTANT: Do not cut
corrugated portion of hose

Insignia NS-DWR3SS1 Specifications

General

Brand	Insignia
Model	NS-DWR3SS1
Category	Dishwasher
Language	English