35
12-Cycle Electric and Gas Dryers
www.insigniaproducts.com
OPERATING INSTRUCTIONS
Using your dryer
Drying a load of clothes
Step 1: Turn on your dryer
• Press the (power) to turn on your dryer. The Clean Filter indicator flashes 10
times when your dryer is powered on. Clean the filter before loading the dryer.
Step 2: Load your dryer
• Place only one wash load in your dryer at a time.
• Heavy and light weight fabrics take different amounts of time to dry. If you mix
heavy and light weight fabrics in a load, lightweight fabrics may be dry at the
end of the cycle while heavy fabrics may still be damp.
• If you only need to dry one or two items, you can improve the tumbling action
and drying efficiency by adding a couple of similar items to the load.
• Overloading restricts tumbling action which results in uneven drying and
excessive wrinkling of some fabrics.
Step 3: Select the dryer cycle and options
1 Turn the Cycle Selector to select a drying cycle. For more information, see
Dryer options and settings on page 37.
2 Optional: Use the control panel buttons (like Dry Temp.) to customize the
drying cycle. For descriptions of buttons, see Control panel on page 9. For
information about which buttons are available for each cycle type, see Dryer
options and settings on page 37.
WARNING: To reduce the risk of fire, electric shock, or injury to persons, read
the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance.
To Next Page
Loading...
Need help?
General
