Insignia NS-TDRE67W1-C User Manual

44
www.insigniaproducts.com
USER MAINTENANCE INSTRUCTIONS
Understanding the error codes
Your dryer is equipped with an automatic error-monitoring system to
detect and diagnose problems at an early stage. When an error occurs,
the dryer beeps for five seconds every 15 minutes. After 24 hours, the
dryer turns off automatically.
Specifications
ERROR CODE POSSIBLE CAUSE SOLUTIONS
The Drying, Cooling,
and Wrinkle Care
(option) indicators
blink.
A control circuit board
malfunction has
occurred.
Contact authorized service
personnel for help. DO NOT use
your dryer.
The Cooling, Wrinkle
Care (process), and
Wrinkle Care
(option) indicators
blink.
The humidity sensor
failed.
Your dryer will complete the current
operating cycle but items could be
over dried. Your dryer can still
operate under the Manual Dry
cycles.
Contact authorized service
personnel for help.
The Wrinkle Care
(process), Clean
Filter, and Wrinkle
Care (option)
indicators blink.
The temperature
sensor failed.
Contact authorized service
personnel for help. DO NOT use
your dryer.
Dimensions
(H × W × D)
41 3/4 × 27.0 × 30.0 in
(105.9 × 68.6 × 76.2 cm)
Weight Net: 121.3 lbs. (55 kg)
Gross: 136.7 lbs. (62 kg)
Capacity 6.7 cu. ft.
Power 120V/240V AC, 60Hz
Heating rating Electric: 4,800W
Gas: 16,000 BTU/hr

Insignia NS-TDRE67W1-C Specifications

General

Brand	Insignia
Model	NS-TDRE67W1-C
Category	Dryer
Language	English