Integra DHC-80.2 User Manual

39
En
When tuned into an RDS station, the RDS indicator lights.
What is RDS?
RDS stands for Radio Data System and is a method of
transmitting data in FM radio signals. It was developed by
the European Broadcasting Union (EBU) and is available
in most European countries. Many FM stations use it these
days. In addition to displaying text information, RDS can
also help you find radio stations by type (e.g., news, sport,
rock, etc.).
The AV controller supports four types of RDS informa-
tion:
■ PS (Program Service)
When tuned to an RDS station that’s broadcasting PS
information, the station’s name will be displayed. Press-
ing Display will display the frequency for 3 seconds.
■ RT (Radio Text)
When tuned to an RDS station that’s broadcasting text
information, the text will be shown on the display as
described in the next section.
■ PTY (Program Type)
This allows you to search for RDS radio stations by type
(➔ 39).
■ TP (Traffic Program)
This allows you to search for RDS radio stations that
broadcast traffic information (➔ 39).
Note
• In some cases, the text characters displayed on the AV controller
may not be identical to those broadcast by the radio station. Also,
unexpected characters may be displayed when unsupported
characters are received. This is not a malfunction.
• If the signal from an RDS station is weak, RDS data may be
displayed intermittently or not at all.
When tuned to an RDS station that’s broadcasting text
information, the text can be displayed.
Displaying Radio Text (RT)
Note
• The message “Waiting” may appear while the AV controller
waits for the RT information.
• If the message “No Text Data” appears on the display, no RT
information is available.
Finding Stations by Type (PTY)
You can search for radio stations by type.
Listening to Traffic News (TP)
You can search for stations that broadcast traffic news.
Using RDS (Australian models)
RDS works only in areas where RDS broadcasts are
available.
Press RT/PTY/TP once.
The RT information scrolls across the display.
1
Press RT/PTY/TP twice.
The current program type appears on the display.
2
Use Preset e/r to select the type of program you
want.
See the table shown later in this chapter.
3
To start the search, press Enter.
The AV controller searches until it finds a station of
the type you specified, at which point it stops briefly
before continuing with the search.
4
When a station you want to listen to is found, press
Enter.
If no stations are found, the message “Not Found”
appears.
1
Press RT/PTY/TP three times.
If the current radio station is broadcasting TP (Traf-
fic Program), “[TP]” will appear on the display, and
traffic news will be heard as and when it’s broadcast.
If “TP” without square brackets appears, this means
that the station is not broadcasting TP.
2
To locate a station that is broadcasting TP, press
Enter.
The AV controller searches until it finds a station
that’s broadcasting TP.
If no stations are found, the message “Not Found”
appears.

Integra DHC-80.2 Specifications

General

Brand	Integra
Model	DHC-80.2
Category	Controller
Language	English