Integra DHC-80.2 User Manual

43
En
The AV controller’s listening modes can transform your listening room into a movie theater or concert hall, with high
fidelity and stunning surround sound.
Explanatory Notes
■ Input Source
The following audio formats are supported by the listening mode.
■ Speaker Layout
The illustration shows which speakers are activated in each channel. See “Speaker Configuration” for the speaker setup
(➔ 54).
About Listening Modes
A
This is mono (monophonic) sound.
S
This is stereo (stereophonic) sound. Two independent audio signal channels are reproduced through two
speakers.
D
This is 5.1-channel surround sound. This surround system has five main channels of sound and a sixth sub-
woofer channel (called the point-one channel).
F
This is 7.1-channel surround sound. This is a further sound enhancement to 5.1 channel sound with two
additional speakers that provide greater sound envelopment and more accurate positioning of sounds.
G
This is DTS-ES surround sound. This surround system can produce a discrete or a matrix-encoded sixth
channel from existing DTS 5.1 encoded material.
H
This is Dolby Digital EX surround sound. This provides a center back surround channel from 5.1-channel
sources.
zxc
nm
Listening
Mode
ij
gh
kl
cb
a
f
de
abFront speakers
c Center speaker
deSurround speakers
f Subwoofer(s)
ghSurround back speakers
ijFront high speakers
klFront wide speakers

Integra DHC-80.2 Specifications

General

Brand	Integra
Model	DHC-80.2
Category	Controller
Language	English