87
En
Controlling iPod & Other Components
Controlling iPod
USB can be used to play music files stored on
iPod/iPhone, which can be plugged into the AV control-
ler’s USB port.
Note
• Note that the rear-panel USB port does not support iPod/iPhone
connection.
Playing Music Files on the iPod/iPhone
This section explains how to play music files on the
iPod/iPhone
*1
.
*1
Compatible iPod models
Standard Mode control
The content information is not displayed onscreen, but can
be manipulated using the iPod/iPhone or the Remote Con-
trol.
Note
• The audio of video content can be played back but no video will
be displayed onscreen.
Connecting the iPod Directly to the
USB Port
Made for:
• iPod touch (1st and 2nd generation)
• iPod classic
• iPod (5th generation)
• iPod nano (1st, 2nd, 3rd, 4th and 5th generation)
• All iPhone models
USB port
NET/USB
Return
1, 3, 2, 5,
4, 7, 6
Random
Display
Album +/–
Repeat
q/w, Enter,
Playliste/r
1
Press NET/USB repeatedly to select the USB
input.
2
Connect the USB cable that comes with the
iPod/iPhone to the USB port at the front of the AV
controller.
• The USB indicator lights (➔ 9) if the AV control-
ler is able to read the iPod/iPhone.
• The USB indicator flashes if the AV controller can-
not read the iPod/iPhone.
3
Press Display to switch to Extended Mode
*3
.
A list of your iPod model’s contents appears. To
open a folder, use q/w to select it, and then press
Enter.
Tip
• With the default settings, the iPod/iPhone can be manipu-
lated in Standard Mode
*2
.
• Pressing Display again switches back to Standard Mode.
*2
The following iPod models are not supported in Stan-
dard Mode. These iPod models can only be controlled
in Extended Mode.
• iPod (5th generation)
• iPod nano (1st generation)
*3
When you disconnect the iPod/iPhone, the AV control-
ler stores the mode. This means that if you disconnect
when in Extended Mode, the AV controller will start in
Extended Mode when you next connect the
iPod/iPhone.
4
Use q/w to select a music file, and press Enter or
1 to start playback.
• To return to the previous menu during playback,
press Return.
• To stop or pause playback, press 2 or 3, respec-
tively.
• To select the next song, press 6. To select the
beginning of the current song, press 7. To select
the previous song, press 7 twice.
• To fast forward the current song, press 4. To
fast reverse the current song, press 5.
• To switch the repeat mode, press Repeat. To
switch the random mode, press Random.
iPod(STD)
Push “DISPLAY” button to switch to Extended mode.
To Next Page
Loading...
Need help?
General
