Intel Atom N2800 User Manual


121
3. Download and install Win32 Disk Imager from:
a. https://launchpad.net/win32-image-writer/+download
4. Use Win32DiskImager to put the image on your USB Stick
5. Write the image to the USB stick by selecting Write.
6. Insert the USB stick into the CRB.
7. When you boot the BIOS be sure to select the USB stick as the primary boot drive.
8. When the selection options appear, select the first option to Boot MeeGo.
7.5.3 Install with USB stick
1. Insert and format the USB stick.
a. On Windows 7, right click on Computer.
b. Click on Manage.
c. On the Computer Management page, Select Storage>Disk Management on the
left hand side
d. Remove any partitions or volumes. This is particularly important when you
have used the USB stick for other Linux distributions or previous versions of MeeGo.
2. Download the Beta MeeGo image.
a. http://download.meego.com/snapshots/latest-cedartrail/images/meego-
netbook-ia32/
b. Choose the meego-netbook-ia32-*.img file
3. Download and install Win32 Disk Imager from:
a. https://launchpad.net/win32-image-writer/+download
4. Use Win32DiskImager to put the image on your USB Stick

Intel Atom N2800 Specifications

General

Processor Number	N2800
Number of Cores	2
Number of Threads	4
Base Frequency	1.86 GHz
TDP	6.5 W
Instruction Set	64-bit
Lithography	32 nm
Launch Date	Q1'12
Instruction Set Extensions	SSE2, SSE3, SSSE3
Embedded Options Available	Yes
Max Memory Size	4 GB
Number of Memory Channels	1
Processor Graphics	Intel® Graphics Media Accelerator 3650
Graphics Base Frequency	640 MHz
Graphics Max Dynamic Frequency	640 MHz
Sockets Supported	BGA559
Max CPU Configuration	1
Idle States	Yes
Intel® 64	Yes
Intel® Identity Protection Technology	No
PCI Express Revision	2.0
Cache	1 MB
Memory Types	DDR3 800
PCI Express Configurations	1x4