Interlogix Simon XT User Manual

6 Simon XT User Manual
Using the Simon XT security system
You can operate the self-contained security system through several different
methods:
• Use the front panel buttons to arm/disarm the system when you enter or exit
your home and to determine which sensors are active and the system status.
• Use the three fast action keys to communicate with the central monitoring
station to report emergency (auxiliary), police, or fire alarms.
• Use a combination of the panel buttons and the display menu to program
certain user features. This method is used by your installer to establish your
system configuration. (“Menu navigation” on page 23.)
Panel controls
The self-contained panel provides the user interface for system operation and
programming system functions.
Figure 2: Simon XT self-contained panel
Table 3: Simon XT panel keys and features
Control
Description
Piezo siren
Provides alarm beeps and status beeps.

Interlogix Simon XT Specifications

Power

power requirements	6V nominal
standby current	30mA (10mA in PowerSave Mode)
peak current	1.7 A

Operating Environment

operating temperature	32 to 120°F (0 to 49°C)
storage temperature	-30 to 140°F (-34 to 60°C)
max. relative humidity	90% non-condensing

Dimensions

height	4 1/16 in.
width	1 7/8 in.