Interlogix Simon XT User Manual

8 Simon XT User Manual
• Doors+Windows and Motions
The phrase “no delay” is appended to the arming level when no entry delay is
active. Possible status icons include:
• Chime (solid bell)
• Special chime (outlined bell)
• Light schedules (clock)
• Sensor lights (light bulb)
• Latchkey on (key)
LEDs
Every key on the front keypad has an LED behind it, except for the scroll arrow
keys. There are four status LEDs behind the row of keys below the LCD display.
These status LEDs indicate the arming level. There is one status LED behind the
OK button. This status LED is lit when there are no open sensors in the system.
All other LEDs are controlled as a group and provide backlighting for the keypad
for 30 seconds after a key is pressed.
Simon XT features
Your Simon XT self-contained security system provides the following features:
• Home security
• Entry and exit delays
• Light control
• Emergency
• Bypassing sensors
• Chime
• Latchkey
The Simon XT features provide you with the ability to perform the following
functions:
• Arm perimeter (doors and windows) and interior (motion) sensors to indicate
intruders.
• Control lights to be turned on and off at a set time or if an intruder is detected.
• Use one button to send quick response alerts to the central monitoring
station.
• Access the system from a key fob (similar to the one used for your car).
• Access the system from a remote telephone.
• Disable sensors so you can leave a window open while the system is armed.
• Get an audio alert when a protected door is opened while the system is
disarmed.

Interlogix Simon XT Specifications

Power

power requirements	6V nominal
standby current	30mA (10mA in PowerSave Mode)
peak current	1.7 A

Operating Environment

operating temperature	32 to 120°F (0 to 49°C)
storage temperature	-30 to 140°F (-34 to 60°C)
max. relative humidity	90% non-condensing

Dimensions

height	4 1/16 in.
width	1 7/8 in.