ITech CalPower IT6302 User Manual

Trigger Command
Copyright© Itech Electronics Co., Ltd. 19
Chapter4 Trigger Command
TRIGger[:IMMediate]
This order is used to generate a trigger signal when trigger source is in BUS
mode. The function of this order is similar to *TRG.
Command syntax
*TRIGger[:IMMediate]
Arguments
None
TRIGger:DELay
This command is used to set the delay time for triggering, which defaults to
zero. When the time is set to zero, the trigger will be immediately responded.
Command syntax
TRIGger:DELay <nr1>
Arguments
Times
Unit
S
Query syntax
TRIGer:DELay?

ITech CalPower IT6302 Specifications

General

Brand	ITech
Model	CalPower IT6302
Category	Power Supply
Language	English