ITech CalPower IT6302 User Manual

Calibration Commands
Copyright© Itech Electronics Co., Ltd. 35
CALibrate:STRing
This command is used to set the current calibration information.
Command syntax
CALibrate:STRing 'str'
Arguments
String, not more than 24 characters.
Query syntax
CALibrate:STRing?
Note: This information will be displayed on VFD. Apart from English
alphanumeric, English letters or common punctuations, do not use other
characters that cannot be displayed on or identified by VFD.

ITech CalPower IT6302 Specifications

General

Brand	ITech
Model	CalPower IT6302
Category	Power Supply
Language	English