ITech IT-M3400 Series User Manual

Quick Reference
External
Meter
observe the total historical regenerative power and capacity information.
UUT Temp DUT temperature
Re-Energy The regenerative power
AHour
capacity of charge and discharge, when the battery simulator
function or battery test function is enabled, the capacity data
will be cleared.
WHour
energy data, when the battery simulator function or battery
test function is enabled, the energy data will be cleared.
Reset
Meas
clearing the energy data and capacity data.
Reset ReE
clearing the regenerative power data.
SDS
Config
Anti-reverse connection module configuration
None No SDS Module detected
Enable Enable the SDS function
Disable Disable the SDS function
System
Reset
Select whether to restore the factory default settings or not.
System
Info
View the system information.
Model
Display the instrument model.
Ver
Display the control board version.
CommVer
Display the communication board version.
SN Display the serial number.
Last Cal Display last calibration date.
Start Time Display the instrument running time.
Instr Alias
The alias of the instrument, which can be modified by the user to note
information
1.8 Models and Options
This series models include:
Model
Voltage(V) Current(A) Power(W)
IT-M3412
60V
30 200
IT-M3422 30 400
Copyright © Itech Electronic Co., Ltd.
12

ITech IT-M3400 Series Specifications

General

Brand	ITech
Model	IT-M3400 Series
Category	Power Supply
Language	English