IEEE-488 Commands
Copyright© Itech Electronics Co., Ltd. 111
*ESR?
This command can read the value of standard event status register. After
executing this command, standard event status register is reset. Bit
definition of standard event status register is as the same as the
standard event status enable register.
Query syntax
*ESR?
Arguments
None
Returns
<NR1>
Related Command
*CLS *ESE *ESE? *OPC
*IDN?
This command can read information about power supply. The returns
parameter contains 4 segments divided by comma.
Query syntax
*IDN?
Arguments
None
Returns
<AARD> segment description
Example
ITECH,IT6522C,601234567890123456,1.03-1.02
*OPC
When all commands before this command are executed, bit OPC in
standard event register will be set to 1.
Command syntax
*OPC
Arguments
None
Query syntax
*OPC?
To Next Page
Loading...
Need help?
General
