To Next Page

To Previous Page

Load Related Command（IT6500C）

Chapter9 Load Related Command（IT6500C）

Except LOAD[:STATe] command, other commands are specially for IT6500C,

which are not suitable for IT6500D series models.

LOAD[:STATe]

This command is used to set load state. When the load of IT6500C Series

power supply is on, you need to select internal load or external load. Default

load is internal load. IT6500D Series power supply only has internal load. This

command is used to turn on and off load function state.

Command syntax

LOAD[:STATe] <bool>

Arguments

0|1|OFF|ON

Reset Value

OFF

Example

LOAD 0

Query syntax

LOAD[:STATe]?

Returns

0|1

LOAD:SELection

This command is used to select internal load or external load, which is

applicable for IT6500C Series power supply.

Command syntax

LOAD:SELection <INTernal|EXTernal>

Arguments

INTernal|EXTernal

Reset Value

INTernal

Example

LOAD:SELection INT

ITech IT6532D User Manual

Other manuals for ITech IT6532D