ITech IT6700 Series User Manual

Quick Start
Copyright © Itech Electronic Co., Ltd. 13
4. Number keys and ESC
5. Function keys
6. UP,DOWN, LEFT and RIGHT key, to move cursor
7. Protective cover
8. Output terminals
⚫ Front panel of IT6726B/IT6726C/IT6726H/IT6726G/IT6726V
1. Power switch
2. VFD screen
3. Compound key and the local switch key
4. Number keys and ESC
5. Function keys
6. UP,DOWN, LEFT and RIGHT key, to move cursor
7. Adjusting knob
2.3 Key introduction
Key description, see the table below:
Keys
Name and the function
(Shift)
Compound key,co-work with OVP、Menu、Save、Trigger、
Lock
(Local)
Local switch key, switch from remote mode to local
operation mode
(Power)
Power on key
0-9
Numeric keys
/OVP
Voltage set key, set the output voltage/over voltage
protection point for the power supply
/Menu
Current set key, set the output current/menu function key,
to set the relevant Parameters for the power supply
/Save
Callback key to call up a set value of system parameters
already stored / storage key, to save system parameter
settings
Meter key, to switch from value set panel and the actual
output value
V-setV-set
I-setI-set
Recall
MeterMeter

ITech IT6700 Series Specifications

General

Brand	ITech
Model	IT6700 Series
Category	Power Supply
Language	English