en-130
12 SPECIFICATIONS
12.6 NOISE _____________________________________________________________
When the machine was tested for sound pressure (Operator Ear).
The Machinery Safety Directive 2006/42/EC
And exposure Of Workers To The Risks Arising From Physical Agents (Noise) Directive 2003/10/EC
By compliance to:
The Lawnmower Standard BS EN ISO 5395:2013
And sound Pressure Standard EN ISO 3746: 2010
ROPS machine: Measured Sound Pressure 89 dB(A) ± 1.05 LWA
Cab machine: Measured Sound Pressure 81 dB(A) ± 1.05 LWA (Best case, windows closed)
Cab machine: Measured Sound Pressure 88 dB(A) ± 1.05 LWA (Worst case, windows open)
When the machine was tested for sound power (Noise in the Environment).
The Machinery Safety Directive 2006/42/EC
And
Noise Emission In The Environment By Equipment For Use Outdoors
Directive 2000/14/EC
By compliance to:
Sound Power Standard EN ISO 3744:1995
HR600 Measured Sound Power 102 dB(A) ± 1.05 LWA
HR700 Measured Sound Power 104 dB(A) ± 1.05 LWA
12.7 SLOPES ____________________________________________________________
DO NOT USE ON the SLOPES GREATER THAN 17° HR700, 19° HR600 with ROPS.
DO NOT USE ON the SLOPES GREATER THAN 15° HR700, 17° HR600 with Cab.
The slope was calculated using static stability measurements according to the requirements of BS EN ISO
5395:2013.
12.8 CUTTING PERFORMANCE _____________________________________________
3.0 m (9ft 6in) width of cut:
3.24 hectares/hr. At 12 kph.
8.0 acres / at 7.5mph
(10% allowance is included for normal overlaps and turning at the end of each cut).
3.28 m (10ft 7in) width of cut:
3.56 hectares/hr. At 12 kph.
8.74 acres / at 7.5mph
(10% allowance is included for normal overlaps and turning at the end of each cut).
3.48 m (11ft 5in) width of cut:
3.76 hectares/hr. At 12 kph.
9.30 acres / at 7.5mph
(10% allowance is included for normal overlaps and turning at the end of each cut).
4.27m (14ft) width of cut:
4.70 hectares/hr. At 12 kph.
11.60 acres / at 7.5mph
(10% allowance is included for normal overlaps and turning at the end of each cut)
To Next Page
Loading...
Need help?
General
