en-20
5 CONTROLS
5.2.A STARTER KEY SWITCH________________________________________________
The Starter Key (A) must be turned clockwise to the 'start' position to start the engine.
After starting, the key must be released and allowed to return automatically to the 'on'
position for normal running.
NOTE:The glow plugs will auto pre-heat depending on the coolant temperature before
cranking begins.
5.
2.B THROTTLE CONTROL ROTARY ________________________________________
Rotate the Throttle Control to the right to increase the engine speed and towards the left to
decrease the engine speed.
NOTE: Operate the machine with the engine at full speed.
5.2.C PARK BRAKE _______________________________________________________
When the engine is running the Park Brake is applied by sliding
back the orange button (1) on the rocker and depressing the switch
(2) on the control panel. When the engine is switched off the Park
Brake is automatically applied.
To release the parking brake depress the opposite end of the rocker
switch.
DO NOT apply the brake when the machine is moving.
5.2.D HAZARD WARNING SWITCH (OPTIONAL) _______________________________
Switches the hazard warning indicators on and off.
The red lens flashes when switched on.