6
3.3 J200 Control Panel
Used on:
• 2012+ J-280, J-275, J-245, J-235
• 2011 2-pump J-280 and J-270
Used on:
• 2013+ J-210
• 2011-2012 1-pump J-230 and J-210
A. Mid 2013+ P/N 6600-501 SMT panel
B. 01/2013-Mid 2013 6600-329
C. 2009-2012 P/N 2600-329
A. Mid 2013+ P/N 6600-500 SMT panel
B. 2009-Mid 2013 P/N 2600-333
1
A
B
C
E
G
F
1
2
A
B
C
D
E
G
F
Button Function
A
LED Display: Can display current water temperature (default display), water temperature setpoint, selected
ltration/heating mode, and error messages.
B
Heat Indicator: Lit when heater is on.
C
Jets 1 Button: Turns jets pump #1 on and off. Press once for low speed; a second time for high speed and a
third time to turn off.
D
Jets 2 Button: Turns high-speed jets pump #2 on and off. Press once to turn on; a second time to turn off
(2-pump models only)
E
Light Button:
With standard incandescent light: Turns underwater light on and off.
With optional (2011-2012)/standard (2013+) LED lighting system: Turns underwater light and top rim accent
lights on in one of three random modes or one of seven solid colors.
F
Warmer Button: Increases water temperature setpoint.
G
Cooler Button: Decreases water temperature setpoint.
OPERATION DETAILS
• Temperature Adjustment: 65 to 104°F (18 to 40°C); temperature override not possible. Software default setting is
100°F (38°C).
• Light System Operation: Light runs for 1 hour then shuts off.
• Jets Button Operation: Jets run for 20 minutes after activated then turn off automatically to conserve energy.
Simply press JETS Button to continue operation for an additional 20 minutes.
To Next Page
Loading...
Need help?
General
