JBL BAR 2.1 User Manual

4b. Wall mount the Soundbar
Use tape to stick the wall-mounted paper guide on the wall, push a pen tip through the center of each
mounting hole to mark the wall-mounted bracket location and remove the paper.
Screw the wall mount brackets on the pen mark; screw the threaded mounting post into the back of
the soundbar; then hook the soundbar on the wall.
5. USE YOUR SOUNDBAR SYSTEM
1. To Control
a. Top panel
b. Remote Control

JBL BAR 2.1 Specifications

General

Audio decoders	-
RMS rated power	300 W
Audio output channels	2.1 channels
Number of tweeter drivers	2
Signal-to-Noise Ratio (SNR)	99 dB
Tweeter diameter (imperial)	1.25 \
Bluetooth	Yes
HDMI version	1.4
Bluetooth version	4.2
Connectivity technology	Wired & Wireless
Digital audio optical in	1
Product color	Black
Apple docking compatibility	Not supported
Receiver included	No
Subwoofer type	Active subwoofer

Weight and Dimensions

Depth	58 mm
Width	965 mm
Height	68 mm
Soundbar weight	1900 g
Subwoofer width	225 mm
Subwoofer height	370 mm
Subwoofer weight	5200 g