17
www.jbl.com
Midrange, Treble, Balance, Fader, Subwoofer Volume, Subwoofer On/
Off and Loudness On/Off. Use the Multi-Function knob to perform the
adjustments.
DSP EQ settings
The GT-X555/GT-X333 has four DSP-EQ settings that change the tonal
balance to suit different types of music or your personal taste. Press
and hold the EQ/Audio button for at least two seconds to enter the
DSP-adjustment mode. Then press the button momentarily to cycle
through the DSP settings:
FLAT: Suitable for quiet background music•
POP: Suitable for pop songs or light music•
ROCK: Suitable for rock or disco music•
JAZZ: Suitable for jazz or classical music•
USER: Activates the user adjustments made in the Audio •
Adjustments menu
DSP OFF: Deactivates the DSP•
MENU FUNCTIONS
DISTRACTION WARNING: Do NOT adjust the GT-X555/GT-X333’s
menu functions while driving. We recommend that you perform
these functions only after pulling off the road into a position that
you are absolutely sure presents no risk. Always obey all traffic
laws while driving.
To enter the GT-X555/GT-X333 menu system, hold the Menu button for
two seconds. The clock (time) adjustment will appear on the display. Each
press of the Menu button will cycle through the following menu options:
Clock-time adjustment, ESP mode, Local/Distance mode, Beep On/Off,
Stereo/Mono mode, SCRL On/Off, Aux input level and Time mode.
When the desired adjustment is displayed, use the Multi-Function knob
to perform the adjustment.
Clock-time adjustment: When you select the Clock-time adjustment,
the hours will flash. After setting the correct hour, press the Skip/Seek
Up button and the minutes will flash. After setting the correct minutes,
press the Menu button again.
Local/Distance (DX) mode (FM/AM only): Select Local (better
performance when you’re closer to the station’s transmitter) or DX (better
reception of distant stations). NOTE: This adjustment only appears if the
radio is the active source when you enter the Menu mode.
Beep On/Off: You can have the GT-X555/GT-X333 emit an audible
acknowledgment “beep” sound every time you press a button or turn
the Multi-Function knob.
Stereo/Mono mode (FM only): Select between stereo and mono
reception (mono reception may reduce background noise when you are
listening to weaker stations). NOTE: This adjustment only appears if the
FM radio is the active source when you enter the Menu mode.
SCRL On/Off: When displaying MP3 ID3 tag information that is longer
than the width of the display, setting SCRL to On will scroll all of the
ID3 tag information (such as Track > Folder > File > Album > Title
> Artist…) across the display. Setting SCRL to Off displays specific
ID3-tag information. You can then press the Band button repeatedly to
display each individual ID3 tag.
Aux input level: Adjust the Aux input for Low, Mid or High level. This
lets you balance the volume of the Aux source with the volume of the
other sources (radio, CD, MP3, etc).
Time mode: Select 12 Hours or 24 Hours (military) time mode.
To Next Page
Loading...
Need help?
General
