10 - 6
Power Take-Off Clutch
Section F Transmission
9803/7130
Section F
10 - 6
Issue 1
Fault Finding
FAULT
A PTO shaft does not turn.
B Excessive PTO noise in operation.
POSSIBLE CAUSE
1 Solenoid valve faulty.
2 Solenoid not energising.
3 Insufficient hydraulic pressure.
4 PTO brake not releasing/siezed.
1 Friction/counter plates in poor
condition/distortion.
ACTION
1 Dismantle solenoid valve and check
component parts, renew valve if
necessary.
2 Check electrical connections, switch,
relay and wiring loom.
3 Check hydraulic pressure at test
point.
4 Check.
1 Renew friction/counter plates.
To Next Page
Loading...
Need help?
General
