Optional Attachments
Impact Protection
255 255
9811/9950-1
Impact Protection
!MWARNING
When using an attachment for example a hydraulic
breaker, where the risk of flying debris is present, a
protective layer or screen guard must be attached to
the front of the cab to protect the operator from flying
debris which could cause injury.
8-5-1-5
The decal A warns the operator against the risk of flying
debris when using an attachment. The attachment must
not be used if a protective layer or screen guard has not
been fitted to the machine. K
Fig 100. ( T 255).
Make sure that the attachment for example a hydraulic
breaker B is positioned in front of the cab, before it is
operated. Do not swing the boom to the side during
operation of the attachment.
Consult your JCB dealer for further information.
732000-4
Fig 100.
B
A
To Next Page
Loading...
Need help?
General
