Operation
Entering and Leaving the Cab
48 48
9811/9950-1
Entering and Leaving the Cab
!MWARNING
Entering/Leaving
Entering or leaving the cab or canopy must only be
made where steps and handrails are provided. Always
face the machine when entering and leaving. Make
sure the step(s), handrails and your boot soles are
clean and dry. Do not jump from the machine. Do not
use the machine controls as handholds, use the
handrails.
INT-2-1-7_1
!MWARNING
For safety reasons, machines fitted with single access
canopies from new must not have the barrier removed.
The machine must always be entered/exited with the
left hand isolator raised via the left hand side.
8-2-9-22
!MWARNING
Do not enter or exit the cab unless the arm rest or lever
lock is fully engaged.
8-2-9-21
Make sure the machine is stopped and correctly parked
before entering or leaving the cab. If necessary, refer to
Stopping and Parking the Machine.
To give sufficient clearance to enter or leave the cab, the
left hand console must be raised. When the handle A and
the left hand console are in the raised position the
excavator controls cannot be operated (Track and Dozer
controls are still active). Lowering the handle to the normal
position connects the excavator controls and allows the
normal operation of the levers.
To Next Page
Loading...
Need help?
General
