EasyManuals Logo
Home>Jonsered>Trimmer>GC 2225

Jonsered GC 2225 User Manual

Jonsered GC 2225
181 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
FUEL HANDLING
English 15
Mixing
Always mix the petrol and oil in a clean container
intended for fuel.
Always start by filling half the amount of the petrol to
be used. Then add the entire amount of oil. Mix
(shake) the fuel mixture. Add the remaining amount of
petrol.
Mix (shake) the fuel mixture thoroughly before filling
the machine’s fuel tank.
Do not mix more than one month’s supply of fuel at a
time.
If the machine is not used for some time the fuel tank
should be emptied and cleaned.
Fueling
If you have spilled fuel on it. Wipe off the spillage and
allow remaining fuel to evaporate.
Always use a fuel container with an anti-spill valve.
Clean the area around the fuel cap. Contamination in
the tank can cause operating problems.
Ensure that the fuel is well mixed by shaking the
container before filling the tank.
!
WARNING! Taking the following
precautions, will lessen the risk of fire:
Mix and pour fuel outdoors, where there
are no sparks or flames.
Do not smoke or place hot objects near
fuel.
Always shut off the engine before
refuelling.
Always stop the engine and let it cool for
a few minutes before refuelling.
When refuelling, open the fuel cap slowly
so that any excess pressure is released
gently.
Tighten the fuel cap carefully after
refuelling.
Always move the machine away from the
refuelling area and source before
starting.
J1156233-38,GC2225,C_1.fm Page 15 Friday, December 6, 2013 7:26 AM

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Jonsered GC 2225 and is the answer not in the manual?

Jonsered GC 2225 Specifications

General IconGeneral
BrandJonsered
ModelGC 2225
CategoryTrimmer
LanguageEnglish

Related product manuals