Jotron AS| TR7750C: Operators Manual Operating Instructions
P/N: 84748 (G)
5.4 Setting, information and configuration menus – transmitter
Under the menu selection from the user menu, various submenu groups are available depending on
the user level.
The submenus and details for them are shown in the tables below.
Access to operation mode, low power level, climax offset
parameters, modulation and standby settings.
Access to configuration parameters for modulation, audio
settings, key (PTT) settings and internal calibration
settings.
Access to configuration parameters for the ethernet interface,
RS232 port, RS485 port, various pin settings on the hardware
interface (remote connectors) and the user access level.
Displays information about active alarms and gives the
user access to internal measurements.
Displays information about the firmware and hardware
release, system up-time and radio identification
Table 5.4-1, Submenus available on the transmitter
To Next Page
Loading...
Need help?
General
