9
Speed control
Speed controller
Maximum sewing speed can be freely set by the speed controller.
Faster speed
Slower speed
Faster speed
Slower speed
Foot controller
To run the machine, press the foot controller.
The harder you press, the faster the machine sews.
Speed controller will set the maximum sewing speed.
Pressing harder → faster speed
Pressing weaker → slower speed
* Always clean the foot controller.
It is important that you do not place any objects on the foot
controller as it may cause injury to the user and may cause
malfunctions.
Presser foot lifting lever
The presser foot can be up or down position by using the presser
foot lifting lever.
1
Lowered position …… Presser foot should be lowered when sew-
ing.
2
Ordinary lift position …… This position is used for fabric removal
and/or changing the presser foot.
3
Extra lift position …… This position is used to put heavy materials
underneath the presser foot.
* Be careful that the presser foot and the needle should not interfere
when the needle is in down position and the presser foot is raised
to the extra lift position.
Presser foot lifting
lever
Presser foot
1
2
3
1
2
3
To Next Page
Loading...
Need help?
General
