2-15. Performing new register of pattern button
1
Display the data input screen.
Only in case of the data input screen (blue), new register of the
pattern button can be performed. In case of the sewing screen
(green), press READY switch and display the data input
screen (blue).
2
Call the new register of pattern button screen.
Press NEW REGISTER button
A
and the new register
of pattern button screen is displayed.
3
Input the pattern button No.
Input the pattern button No. you desire to newly register with
the ten keys
B
. New register to the pattern button No. which
has been already registered is prohibited.
It is possible to retrieve the pattern button No. which has not
been registered with the “+” or “–” button (
C
and
D
).
4
Select the folder to be stored.
It is possible for the pattern buttons to be stored in ve folders.
As many as 10 pattern buttons can be stored for one folder.
The folder to store the button can be selected with FOLDER
SELECTION button
E
.
5
Determine the pattern No.
Press ENTER button
F
to determine the pattern button
No. to be newly registered and the data input screen at the
time of pattern button selection is displayed.
Press P1 to P50 key while the sewing screen is displayed and the presser comes down.
Be careful that your ngers are not caught in the presser.
A
B
D
C
F
E
To Next Page
Loading...
Need help?
General
