– 84 –
(2) Releasing procedure of the warning
When the designated inspection time is reached, the warning
screen is displayed.
In case of clearing the inspection time, press CLEAR button
A
. The inspection time is cleared and the pop-up is closed. In case
of not clearing the inspection time, press CANCEL button
B
and close the pop-up. Every time one sewing is completed, the
warning screen is displayed until the inspection time is cleared.
Warning Nos. of the respective items are as follows.
• Needle replacement : A201
• Cleaning time : A202
• Oil replacement time : A203
For the grease-up portion, refer to the item of
"
#
-1-12. Replenishing the designated places with
grease" p.122.
3
Perform clearing remaining time up to the replacement.
When button
C
of the item you desire to clear is pressed, the
time of replacement clear screen is displayed. When CLEAR
button
F
is pressed, the remaining time up to the re-
placement is cleared.
4
Display the threading diagram.
When threading button
G
displayed in the maintenance
and inspection screen is pressed, the needle thread threading
diagram is displayed.
Observe it when performing threading.
F
G
B
A
To Next Page
Loading...
Need help?
General
