– 89 –
1
Display the media format screen.
When
switch is held pressed for three seconds, MEDIA
FORMAT button
A
is displayed on the screen. When
this button is pressed, the media format screen is displayed.
2-28. Performing formatting of the media
To re-format a medium, the IP-420 has to be used. The IP-420 is not able to read any medium which is
formatted on a personal computer.
2
Start formatting of the media.
Set the media you desire to format to the media slot, close
the cover, press ENTER button
B
and formatting starts.
Save necessary data in the media to the other media before
formatting. When formatting is performed, the inside data are
deleted.
B
A
When two or more media are connected to the sewing
machine, the medium to be formatted is determined by
the predetermined priority order.
High
,
Low
CF(TM) slot
,
USB device 1
,
USB device 2
,
....
When a CompactFlash (TM) is inserted in the CF(TM)
slot, the CompactFlash (TM) will be formatted accord-
ing to the priority order as shown above.
Refer to the USB specications for the priority order of
access.
To Next Page
Loading...
Need help?
General
