37
Setting of the zigzag width
Change the zigzag width
with +/– of switch 4.
Setting of the position of
stitch base line
Change the position of
stitch base line with +/– of
switch 5.
•Zigzag width can be set from “0” to 10 mm. (Set value is limited by the max.zigzag width limitation.)
•Stitch base line can be set as follows. When the center of zigzag is “0.0”, Right side : “+” Left side : “–”.
6-6. Setting of the sewing shape
Setting of the position of sewing start
Set the position of sewing start with ▲／▼ of switch 6.
Setting of the stop position
Set the stop position with ▲／▼ of switch 7.
4
4
5
5
6
6
7
7
(1) Standard zigzag, 2-step zigzag and 3-step zigzag stitch
■Sewing shape list first screen
1) Select standard (2-step or 3-step) zigzag stitch in the sewing shape list first screen.
2) The selected shape reverses and is displayed on the left end of the screen.
3) Press to display the sewing shape setting screen.
■Sewing shape setting screen
Standard zigzag
2-step zigzag
3-step zigzag
Stop position, optional Stop position, right Stop position, left
Sewing start Optional Sewing start Right Sewing start, left
To Next Page
Loading...
Need help?
General
