Operation manualⅠ
3− 10
3.10 When the feeder bank moves down (only if an overall feeder
exchange trolley option is attached on the machine)
Error screen Causes of the error
① The feeder bank moved down while the
machine was producing a PWB.
② The sensor of the bank-up cylinder
malfunctions.
How to handle an error
Set the overall feeder exchange trolley on the machine correctly, and move up the feeder bank.
Then, press the <START> switch to resume the PWB production.
You cannot start/resume PWB production when the feeder bank moves down.
To Next Page
Loading...
Need help?
General
