−
16
−
V. MAINTENANCE
1. Tilting the sewing machine head
Remove screw
, and slowly tilt the sewing machine head in
the direction of arrow.
(Caution)
1. Thesewingmachinehasbeenxedwithscrew
at the time of delivery. Normally, use the sewing
machineinaxedstate.
2. Whentiltingthesewingmachine,besureto
perform the work at the position of the origin of
thebuttoncarrier.
Thesewing machinehead mayinterfere withthe
buttoncarrier.
3. Returnthesewingmachineheadgentlywhen
returningittoitshomeplace.
If itis returned quickly,the base portion maybe
damaged.Inaddition,becarefulnottoallowyour
ngerstobecaughtinbetweenportion
andthe
sewingmachinehead.
4.Whenreturningthesewingmachinehead,
move theposition of button clampunit
inthe
directionof
sothatportion
ofbuttonclamp
unit
is located ontherear side oftheclamp
releasearm
of the button feeder. Otherwise,
buttonclampjawlevers
donotopenatthetime
ofsewing.So,becareful.
5. Afterreturningthesewingmachinehead,besure
toxthesewingmachineheadwithscrew
.
WARNING :
Tilt / raise the sewing machine head with both hands taking care not to allow your fingers to be caught in
the head.
Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start of the
sewing machine.
To Next Page
Loading...
Need help?
General
