JUKI MB-372 Instruction Book

To thread the machine, put it in stop
motion position, and thread in accordance with
the diagram as shown in Fig. 6, 7. Start from
thread spool stand—» needle thread guide pin
No. I ♦ tension disc No. I d)—» tension disc
No. 2 (g)—» thread puIl-ofTlever » nipper (§)—•
thread guide No. 2 (6)—♦ upper eyelet of (ace
plate—»thread guide No. 3 (2)—* needle bar bear
ing block
and thread guide (§)—* thread tension
disc No. 3
thread guide (9)-^ tension disc No. 3
» to the needle eye from front toward rear
and draw the thread out about 6-^7 m/m (about
1/4").
To draw out the thread, push the nipper
releasing plunger knurled nut, @ the nipper will
be released and the thread can be drawn out.
ThreadX
int
u IJ
From the library of: Superior Sewing Machine & Supply LLC

JUKI MB-372 Specifications

General

Brand	JUKI
Model	MB-372
Category	Sewing Machine
Language	English