Jung KNX User Manual

KNX Room actuator 230 V
Ref.-no.: RA 23024 REGHE
11
Connecting cross-section
Single-wire 0.5...4 mm²
stranded wire without ferrule 0.35...4 mm²
stranded wire with ferrule 0.14...2.5 mm²
Heating outputs
Contact type semiconductor, ε
Switching voltage AC 230/240 V
Switching current 5 mA … 50 mA
Inrush current max. 1.5 A, 2 s
Number of drives per output max. 4
Relay outputs
Contact type potential-free n.o. contact
(μ-contact)
Switching voltage AC 230/240 V
Switching capacity AC1 (cos ϕ > 0.8) 16 A
Switching capacity AC3 (cos ϕ < 0.8) 6 A
Switching capacity AX (fluorescent lamps) 16 AX
Max. inrush current 200 μs 800 A
Max. inrush current 20 ms 165 A
Load rating of relay outputs
Resistive load 3000 W
Capacitive load: (max. 140 μF) 16 A
Motors 1380 VA
Lamp loads
Incandescent lamps: 3000 W
230 V halogen lamps 2500 W
TRONIC transformers 1500 W
Inductive transformers: 1200 VA
Fluorescent lamps
non-compensated 1000 W
parallel compensated (max. 140 μF) 1160 W
lead-lag circuit (max. 140 μF) 2300 W
Compact fluorescent lamps
non-compensated 1000 W
parallel compensated (max. 140 μF) 1160 W
Mercury vapour lamps
non-compensated 1000 W
parallel compensated (max. 140 μF)
Electronic Ballasts see product
documentation
Technical specifications subject to change.

Jung KNX Specifications

General

Brand	Jung
Model	KNX
Category	Controller
Language	English