Juniper JUNOS 10.1 - RELEASE NOTES REV 4 User Manual

Services Applications
■ FlowTapLite enhancements—Extend support for interception of IPv6 packets
on MX Series, M120, and M320 routers. For IPv6, the global filter taps packets
from the default IPv6 routing table and does not tap packets from other VRFs.
To tap packets from other VRFs, you can install separate VRF filters. For IPv4,
the global filter intercepts all IPv4 packets irrespective of the VRF. The limit for
filters remains 3000, which is now shared between IPv4 and IPv6. For example,
you can install 3000 IPv4 filters or 3000 IPv6 filters, or a combination of both
that totals 3000. You cannot install 3000 IPv4 filters and 3000 IPv6 filters.
No new statements are required to configure these enhancements. However,
whether you use IPv6 flow tapping or not, you must include the family inet6
statement at the [edit interfaces vt-fpc/pic/port unit logical-unit-number] hierarchy
level.
[Services Interfaces]
Subscriber Access Management
New Features in JUNOS Release 10.1 for M Series, MX Series, and T Series Routers ■ 27
New Features in JUNOS Release 10.1 for M Series, MX Series, and T Series Routers

Juniper JUNOS 10.1 - RELEASE NOTES REV 4 Specifications

General

Brand	Juniper
Model	JUNOS 10.1 - RELEASE NOTES REV 4
Category	Software
Language	English