35
4 Permanent settings in programming mode
Example: Proceed as follows to change the unit for the amount of
water from ‘ml’ to ‘oz’.
Precondition: ‘Please selec
t product:’ is displayed.
O T Press the P button.
‘Maintenanc
e status (1/5)’
g T
Turn the Rotary Switch until the program item ‘Machine set-
tings (3/5)’
is displayed.
T Press the ‘Unit
s’ button.
‘Units’
T
Press the ‘oz’ butt
on.
T Press the ‘Save’ button.
‘Saved’ appears briefly on the display.
‘Machine settings (3/5)’
O T
Press the P button to exit programming mode.
‘Please select product:’
In the progr
am item ‘Machine settings (3/5)’ / ‘Factory setting’ you
can reset v
arious settings to their fa
ctory settings:
U
‘All products’
U
The settings (amount of water, coffee strength, temperature
etc.) for all products are reset to the factory settings.
U
‘Machine’
U
All user settings (apart from the ‘filter’, ‘water hardness’ and
time and date settings) are reset to the factory settings. The
GIGA then switches off.
U
‘Empty system’
U
The system is emptied. Your GIGA then switches off.
Example: Proceed as follows to reset the values for all products to
the factory settings.
Precondition: ‘Please select product:’ is displayed.
O T
Press the P button.
‘Maintenanc
e status (1/5)’
g T
Turn the Rotary Switch until the program item ‘Machine set-
tings (3/5)’
is displayed.
T Press the ‘Fact
ory setting’ button.
‘Factory setting’
T
Press the ‘All products’ button.
‘All produc
ts’ / ‘Reset all products to the factory settings?’
Restore factory settings
To Next Page
Loading...
Need help?
General
Weight and Dimensions
