36
4 Permanent settings in programming mode
T Press the ‘Yes’ button.
‘Saved’ appears briefly on the display.
‘Factory setting’
O T
Press the P button to exit programming mode.
‘Please select product:’
In this progr
am item you can set the language used by your GIGA.
Ex
ample: Proc
eed as follows to change the language from ‘English’
to ‘Deutsch
’.
Precondition: ‘Please selec
t product:’ is displayed.
O T Press the P button.
‘Maintenanc
e status (1/5)’
g T
Turn the Rotary Switch until the program item ‘Machine set-
tings (4/5)’
is displayed.
T Press the ‘Ch
oose language’ button.
‘Choose language’
E T
o display more languages, press the ‘Next’
button (bottom
right).
T
Press the ‘Deutsch’ button.
‘Gespeichert’ appears briefly on the display.
‘Geräteeinstellungen (4/5)’
O T
Press the P button to exit programming mode.
‘Bitte wählen Sie Ihr Produkt:’
In the program it
em ‘Machine settings (4/5)’ / ‘Display’ you can make
the f
ollowing settings
:
U
‘Brightness’ (as percentages)
U
‘Contrast’ (high, normal, low)
U
‘Backlight’ (backlighting; as percentages)
Example: Proceed as follows to change the brightness of the display.
Precondition: ‘Please select product:’ is displayed.
O T
Press the P button.
‘Maintenanc
e status (1/5)’
g T
Turn the Rotary Switch until the program item ‘Machine set-
tings (4/5)’
is displayed.
T Press the ‘Display’ butt
on.
‘Display’
Language
Display settings