JVC BD-X201M User Manual

31
Setting the Encoding Format for Audio & Video
The setting of encoding formats for audio and video is carried out from the RECORDER MENU (1/2) screen as described below.
Setting Encoding Formats
䡵Stop the DVD recorder.
1. Open the RECORDER MENU (1/2) screen.
q Press the SET UP button to display the Setup Menu.
w Select RECORDER using the 6 and 7 buttons and then press the SET
button.
2. Make the required settings on the RECORDER MENU (1/2)
screen.
q Select the parameter to be set using the 6 and 7 buttons, and then
press the SET button to display a list of possible settings.
w Select the required setting using the 6 and 7 buttons, and then press
the SET button to adopt it.
3. Complete the setting process.
To do so, carry out one of the following procedures.
• Select MENU and press the SET button to return to the Setup Menu.
• Press the SET UP button to return to the normal screen display.
RECORDER MENU (1/2) screen
Audio Encoding
䡵AUDIO ENCODE
This parameter is used to set the encoding format for audio data.
NO AUDIO : Do not record audio sound.
LPCM : Linear PCM encoding
DOLBY DIGITAL: Dolby AC3 encoding.
MPEG : MPEG encoding (Effective only when the TV TYPE item from SYSTEM MENU (2/2) screen is set to PAL.)
Note
If the SET UP button is pressed while in Recording mode, the video encode quality and audio encoding format will be
displayed on-screen. Press the SET UP button once again to hide this information.
MENU
CHAPTER CREATION
MANUAL
SET INTERVAL
Every05Min
AUTO CHAPTER (RECPAUSE)
ON
ENCODE QUALITY
SP
AUDIO ENCODE
DOLBY DIGITAL
RECORDER MENU (1/2)
Video Encoding
Item Description
ENCODE QUALITY For setting the recording quality. Recording quality and time vary with the set values as follows:
(For a 4.7 GB disc)
* Only UXP, XP or SP can be selected when the AUDIO ENCODE item is set to LPCM.
Set Value
Recording
Time
Picture Quality Upload Size
UXP (NOT DVD VIDEO)
XP
SP
LP
EP
DLP (Double LP)
DEP (Double EP)
40 mins
60 mins
120 mins
180 mins
240 mins
360 mins
480 mins
High
∞
Normal
√
Low
√
D1: NTSC= 720 x 480 dots
PAL = 720 x 576 dots
HalfD1: NTSC = 352 x 480 dots
PAL = 352 x 576 dots
SET UP button
SET button
BUSY
OPEN/CLOSE
TOP
MENU MENU
OPTION DV Y/C LINE
SET UP
SET
07e_BD-X201MU/E(26_35).p65 05.1.17, 11:18 AM31

JVC BD-X201M Specifications

General

Brand	JVC
Model	BD-X201M
Category	DVD Recorder
Language	English