JVC DT-V1710CG Service Manual

1-10 (No. 52152)
3.3.3 FACTORY SETTING VALUE
! INITIAL SETTING VALUE TABLE [SET-UP MENU]
Setting Item Data / Variable range Initial setting value Remarks
FUNCTION SETTING
COLOR SYSTEM AUTO / NTSC / PAL AUTO Apply the NTSC/PAL signal
AUTO INPUT ON/OFF OFF Apply the HD SDI/SDI signal
SYNC SELECT INT. / EXT. INT.
RUSH DELAY TIME STD. / SLOW STD.
TALLY SELECT GREEN / RED GREEN
REMOTE SYSTEM MAKE / TRIGGER MAKE
E.AUDIO GROUP 1G / 2G / 1-2G 1G
HOUR METER X 100h 000 – 655 000
PICTURE SUB ADJ.
CONTRAST -20 – +20 00
BRIGHT -20 – +20 00
CHROMA -20 – +20 00
PHASE -20 – +20 00
NTSC SETUP 00 / 75 00
COMPO. LEVEL SMPTE / B00 / B75 SMPTE Apply the Component signal
COLOR TEMP. / BAL.
COLOR TEMP. LOW / HIGH LOW
BLUE DRIVE MIN – MAX (127 steps) 000
RED DRIVE MIN – MAX (127 steps) 000
GREEN CUTOFF MIN – MAX (205 steps) 000
BLUE CUTOFF MIN – MAX (205 steps) 000
RED CUTOFF MIN – MAX (205 steps) 000
SIZE / POSI. ADJ.
H.SIZE -20 – +20 00 Reduced to 00 – +20 during the under-scan mode.
H.POSITION -20 – +20 00
V.SIZE -20 – +20 00
V.POSITION -20 – +20 00
ZOOM H. SIZE -20 – 00 00
ZOOM V. SIZE -20 – +20 00
DISTORTION ADJ.
PINCUSHION -20 – +20 00
PIN.BALANCE -20 – +20 00
PARALLELOGRAM -20 – +20 00
TRAPEZOID -20 – +20 00
ROTATION -31 – +31 00
STATUS DISPLAY
STATUS DISPLAY ON / OFF ON
LEVEL METER ch OFF/1:2/12:34/31:24/123:456/1-8 OFF
BAR TYPE 3 COLORS / WHITE-1 / WHITE-2 3 COLORS
REFERENCE LEVEL -20dB / -18dB -20dB
OVER LEVEL -8dB / -6dB / -4dB / -2dB -8dB
BAR BRIGHTNESS HIGH / LOW HIGH
CONTROL LOCK ON / OFF OFF

JVC DT-V1710CG Specifications

General

Brand	JVC
Model	DT-V1710CG
Category	Monitor
Language	English